Propane Gas Regulator + Dial Level Gauge

Propane Gas Regulator with Dial Gauge

This is a great product as you gives you a guide on the dial of the gas level in your bottle helping to prevent being caught out with no gas.

This is a single stage propane gas regulator preset to 37mbar to EN12864, the regulator is only suitable for gas bottles with the following type of fitting:

How to connect a Propane gas bottle

Check that the valve hand wheel is off by turning it clockwise

Remove the protective plug (remember this is a left handed thread) and leave it hanging (to replace later)

Check the bullnose connection on the regulator for any damage and screw on (remember left handed thread)

Make sure the gas bottle connection is tight - When you need gas, turn the valve hand wheel

IMPORTANT: This type of gas bottle has a female valve connection. Check the connection is clEAN: and undamaged. Always use the correct size spanner and fully tighten.

How to disconnect a Propane gas bottle

Turn the valve hand wheel off (clockwise rotation) - Never remove the regulator with the bottle valve open

Use a spanner to remove the regulator (remember left hand thread)

Replace the protective plug into the valve outlet