# Gas Regulator with Dial Gauge

This is a great product as it gives you a guide on the dial of the gas level in your bottle, helping to prevent being caught out with no gas.

This is a single-stage gas regulator preset to 28/29mbar, and the regulator is only suitable for the following type of gas bottle and fitting:

## How to connect a 4.5kg Gas Bottle

1. Check the on/off valve hand wheel is off by turning it clockwise and then take off the protective black cap (keep it for future use).

2. Check the black sealing washer is in place on the regulator.

3. Fit the connecting nut (left-hand thread) to the bottle using a suitable spanner; tighten it firmly, but don't over-tighten it as this can damage the washer.

## How to disconnect a 4.5kg Gas Bottle

- Make sure you do not disconnect the regulator (or connecting nut) with the cylinder valve open. Turn the on/off valve hand wheel off (clockwise rotation).

- Use a suitable spanner when you disconnect the regulator (left-hand thread), then screw the protective black cap back onto the cylinder valve outlet.