See more Mortising machines
Charnwood 5/8'' Bench Top Morticer with Sliding Bed
Sold & shipped by Charnwood Machinery
Available online only and not stocked in B&Q stores
Product details
Product information
Bench top hollow chisel morticer with an accurate sliding table system.
Adjustable Down feed Handle
Table Moves Through X and Y Axis
Cast Iron Head, For Strength & Stability
Cast Iron Table, Hard Wearing For A Long Life
Cast Iron Fence, For Secure Work piece Clamping
Cast Iron Base, For Fixing to a Workbench
Plunging Head Controlled by Gas Filled Spring
Quiet Induction Motor Delivers The Power
Using Cast Iron throughout gives the strength and rigidity to this morticer, to allow timbers of up to 125mm deep and 145mm high to be clamped securely.
There are two separate controls for moving the table.Firstly the operator winds the table forwards or back until the chisel is aligned with the back edge of the mortice.Secondly the hand wheel is turned to move the table left or right until the chisel is positioned at one end of the mortice. Pulling the downfeed handle lowers the chisel and begins the cut. Once the first square has been cut, the chisel is withdrawn, and the table moved over to begin the next square.
Supplied with, mortice depth stop, handle return stop, chuck key, work clamp, 3/4" chisel bush, cable and plug. Chisels are supplied separately.
Charnwood W316 Specification
Accepts chisel shank size 3/4″
Motor Speed 1400rpm
Motor (induction) 370w (1/2hp), 240v
From Chisel Bush to Table 220mm
Maximum timber height with a 1/2″ Chisel Fitted 110mm
Timber Clamping width 25mm (1″) to 100mm (4”)
Chisel capacity 1/4″ to 5/8″
Vertical Chisel Stroke 105mm (4”)
Accepts chisel shank size 3/4″
Table travel (left to right) 170mm (6.5”)
Table travel (front to back) 75mm (3”)
Motor (induction) 370w (1/2hp), 240v
Motor Speed 1400rpm
Weight 42kg
Dimensions (WxDxH) 520mm x 550mm x 790mm
- Guarantee - 5 years
- Comes with Mortice depth stop, handle return stop, chuck key, work clamp, 3/4″ chisel bush, 1.75m cable and plug
Features and benefits
- Bench top hollow chisel morticer with an accurate sliding table system.
- Allows timbers of up to 125mm deep and 145mm high to be clamped securely.
- Using Cast Iron throughout gives the strength and rigidity to this morticer.
- Adjustable Down feed Handle, and table Moves Through X and Y Axis
- Plunging Head Controlled by Gas Filled Spring, and a quiet Induction Motor Delivers The Power
- Cast Iron Base, For Fixing to a Workbench
- Plunging Head Controlled by Gas Filled Spring
- Adjustable Down feed Handle
Specifications
Brand | Charnwood |
---|---|
Height (mm) | 790mm |
Length (mm) | 520mm |
Pack quantity | 1 |
Power voltage supply | 240V |
Width (mm) | 550mm |
Product code | 5060281698391 |